Ventilation unit complete with heat recovery exchanger, dedicated to air renewal without wasting of energy.
The unit is particularly suitable for single family housing, apartments and in all cases where the nominal flow rates for air exchange do not exceed 320 m³/h. Constant flow rate selectable in 3 levels.
-Self-supporting frame in metal sheet.
Panels in galvanized metal sheet, externally painted, with high density EPS internal insulation; frontal aesthetic in Alucobond Composite
-High efficiency countercurrent cross flow exchanger made of polypropylene. Low freezing temperatures. Very high exchange efficiency.
-Brushless fans with electronic motor and constant flow control; very high efficiency and low noise levels.
-Filters 80% ePM1 with low pressure drop both for supply and return, easily removable.
The unit is supplied without electronic card and the fan speed is varied by means of a 0-10V input signal.
It is possible to purchase separately the EVTDV remote terminal with LCD display for controlling the speed of the fans and the Bypass with various advanced functions, including:
-control of the speed of the individual fans independently which means that the machine can be used in pressure or depression mode;
-timed dirty filter signal;
-possibility to connect the EVSQV air quality sensor sold separately.
Electronic card for 3-step speed management, anti- freeze function and automatic bypass. Wall-mounted remote touch panel on 503 box. Temperature sensors on the machine and possibility of managing the auxiliary hot water battery.
Humidity / air quality sensors integrated in the remote display.
EVCNV2-N: advanced remote control with integrated humidity and VOC / CO₂ sensors, black color.
EVCNV2-B: advanced remote control with integrated humidity and VOC / CO₂ sensors, white color.
EVCNW2-N: advanced remote control with integrated humidity and VOC / CO₂ sensors, with integrated black Wi-Fi.
EVCNW2-B: advanced remote control with integrated humidity and VOC / CO₂ sensors with integrated white Wi-Fi.
A or B configurations selectable by electronics.
Homes, clinics, for air exchange with up to 90% reduction in energy waste.
Grandezza EVHRP SMALL | 10 H/V | 15 H/V | 25 H/V | |
Tipo di Ventilatori | Centrifughi a pale avanti - motore elettronico direttamente accoppiato Brushless | |||
Numero Ventilatori | Nr. | 2 | ||
Portata aria | m³/h | 130 | 210 | 320 |
Pressione utile | Pa | 100 | 100 | 100 |
Scambiatore di calore (Dati riferiti alla norma UNI EN 13141-7 Temp.interna 20° - Umidità interna 28% - Temp.esterna 7° - Umidità esterna 72%) | ||||
Tipo di scambiatore | Piastre controcorrente - materiale polipropilene | |||
Numero Scambiatori | Nr. | 1 | ||
Efficienza di recupero | % | 87,0 | 85 | 85 |
Filtri | ||||
Tipo di filtri | Filtri Piani | |||
Classe di filtrazione | ePM1 80% | |||
Dati acustici (Dati riferiti alla norma UNI EN 3741 e UNI EN 3744 ) | ||||
Potenza sonora Lw trasmessa dalla struttura | dB(A) | 48 | 51 | 52 |
Potenza sonora Lw irradiata dal canale | dB(A) | 55 | 57 | 60 |
Pressione sonora media Lp a 1 mt | dB(A) | 41 | 43 | 45 |
Pressione sonora media Lp a 3 mt | dB(A) | 34 | 36 | 38 |
Dati Elettrici | ||||
Alimentazione | V / ph / Hz | 230 / 1 / 50 | ||
Corrente assorbita | A | 1,2 | 1,2 | 2,2 |
Potenza assorbita | W | 80 | 140 | 180 |
Grado di protezione | IP | X2 | X2 | X2 |
Dimensionali | ||||
Larghezza | mm | 580 | 580 | 580 |
Profondità | mm | 580 | 580 | 580 |
Altezza | mm | 255 | 255 | 315 |
Diametro attacchi | mm | 160 | 160 | 160 |
Scarico condensa | mm | 12 | 12 | 12 |
Peso | kg | 19 | 19 | 23 |
classificazione dei vari modelli secondo il regolamento europeo 1253/2014 e 1254/2014 | ||||
Con controllo remoto EVCNV2 - EVCNW2 (UR/VOC-Co2) | - | A | A | A |
Riferimento | Descrizione |
A | Quadro elettrico |
B | Scarico condensa installazione orizzontale |
C | Passaggio cavi alimentazione elettrica e display |
D | Scarico condensa installazione verticale |
E | Portine filtri |
F | Attacchi circolari Ø 160mm |
Riferimento | Descrizione |
A | Quadro elettrico |
B | Scarico condensa installazione orizzontale |
C | Passaggio cavi alimentazione elettrica e display |
D | Scarico condensa installazione verticale |
E | Portine filtri |
F | Attacchi circolari Ø 160mm |
Riferimento | Descrizione |
PAE | Presa aria esterna |
EXP | Espulsione |
IMM | Immissione ambiente |
RIP | Ripresa ambiente |
In the case of vertical installation, it is possible to purchase the AESTHETIC COVER in composite panel in aluminum painted RAL9003.
The EVHRP SMALL units can also be installed recessed with the aid of a special formwork with 30 mm EPS insulation on all walls and 20 mm Foam insulation on the front closing panel, studied and designed in detail.
Two distribution boxes are housed in the formwork which allow the connection of up to 6 corrugated delivery pipes and 6 corrugated return pipes. The connection is made by means of sleeves with shutter suitable for the connection of the HTPE PLUS corrugated pipe with an internal diameter of 63 mm and an external 75 mm (on request a 76 mm internal and 90 mm external diameter). The sleeves for connecting the pipe are already included in the delivery of the formwork.
It is also possible to purchase the EXTERNAL INTAKE KIT necessary to create the external air intake and exhaust air expulsion directly above the formwork without the aid of further ducts.
All dimensions are espressed in mm.
model | EVHRP SMALL (configuration A) | remote electronic control EVCNV2-N. Black color | remote electronic control EVCNV2 -B. White color | EVCNW2-N remote electronic control with Wi-Fi connection. Black color | EVCNW2-B remote electronic control with Wi-Fi connection. White color | pair of filters kit |
euro | euro | euro | euro | euro | euro | |
10 | 2015,11 | 230,88 | 230,88 | 285,05 | 285,05 | 71,14 |
15 | 2318,31 | 71,14 | ||||
25 | 2710,07 | 82,57 |
Model | Euro |
Composite panel in aluminum painted RAL9003 | 150,48 |