Regulation dampers with blade movement by means of gears located outside the air flow and special gaskets on the blades, capable of guaranteeing tightness class 4 according to the EN 1751 Standard.
- 15/10 galvanised steel frame;
- galvanised steel honeycomb blades with special profile for housing gaskets, thickness 0.8+0.8 mm;
- blade pitch 200 mm;
- external levers to control the damper;
- bronze bushings;
- galvanised control pins ø18 mm;
- lateral seal with stainless steel plates and single seal on each blade.
- With manual control R12;
- AISI 304 version;
- electric servomotor.
| L | No. holes Ø 8 mm | X |
| 200 | 1 | 140 |
| 300 | 1 | 190 |
| 400 | 2 | 90 |
| 500 | 2 | 140 |
| 600 | 2 | 190 |
| 700 | 3 | 90 |
| 800 | 3 | 140 |
| 900 | 3 | 190 |
| 1000 | 4 | 90 |
| 1100 | 4 | 140 |
| 1200 | 4 | 190 |
| 1300 | 5 | 90 |
| 1400 | 5 | 140 |
| 1500 | 5 | 190 |
| H | No. holes Ø 8 mm | Y |
| 210 | 0 | 0 |
| 410 | 1 | 205 |
| 610 | 1 | 305 |
| 810 | 2 | 255 |
| 1010 | 3 | 205 |
| 1210 | 3 | 305 |
| 1410 | 4 | 255 |
| 1610 | 5 | 205 |
| 1810 | 5 | 305 |
| 2010 | 6 | 255 |
V: crossing speed (m/s).
Δpt [Pa]: pressure drops in Pascal.
LwA [dB(A)]: noise level.
α: opening angle of the regulation damper, 0° the blades are fully open.
*Speed not recommended.
| Vk (m/s) | α 0° | α 30° | α 60° | |||
| Δpt [Pa] | LwA [dB(A)] | Δpt [Pa] | LwA [dB(A)] | Δpt [Pa] | LwA [dB(A)] | |
| 1 | < 5 | < 20 | 6 | 32 | 130 | 49 |
| 2 | < 5 | 23 | 23 | 49 | 520 | 69 |
| 3 | < 5 | 34 | 52 | 58 | 1185 | 16 |
| 4 | < 5 | 42 | 94 | 66 | 1350 | 83 |
| 5 | < 5 | 48 | 145 | 71 | > 1500* | 87 |
| 6 | < 5 | 53 | 215 | 75 | > 1500* | 92 |
| Surface area [m2] | Servomotor | |
| WITHOUT spring return [Nm] | WITH spring return [Nm] | |
| < 0,20 | 20 | 10 |
| < 1,50 | 30 | 20 |
| < 2,20 | 40 | 40 |
| < 3,00 | 60 | 40 |
| < 4,00 | - | 80 |
| Description | € |
| Manual control R12 pin ø 18mm | a.r. |