ERT200T Galvanised steel shut-off regulation dampers 200 mm pitch.

Description

Regulation dampers with blade movement by means of gears located outside the air flow and special gaskets on the blades, capable of guaranteeing tightness class 4 according to the EN 1751 Standard.

Characteristics

- 15/10 galvanised steel frame;
- galvanised steel honeycomb blades with special profile for housing gaskets, thickness 0.8+0.8 mm;
- blade pitch 200 mm;
- external levers to control the damper;
- bronze bushings;
- galvanised control pins ø18 mm;
- lateral seal with stainless steel plates and single seal on each blade.

On request

- With manual control R12;
- AISI 304 version;
- electric servomotor.

Dimensional characteristics

 
L No. holes Ø 8 mm X
200 1 140
300 1 190
400 2 90
500 2 140
600 2 190
700 3 90
800 3 140
900 3 190
1000 4 90
1100 4 140
1200 4 190
1300 5 90
1400 5 140
1500 5 190

 
H No. holes Ø 8 mm Y
210 0 0
410 1 205
610 1 305
810 2 255
1010 3 205
1210 3 305
1410 4 255
1610 5 205
1810 5 305
2010 6 255

Pressure drop and generated noise

V: crossing speed (m/s).
Δpt [Pa]: pressure drops in Pascal.
LwA [dB(A)]: noise level.
α: opening angle of the regulation damper, 0° the blades are fully open.
*Speed not recommended.

 
Vk (m/s) α 0° α 30° α 60°
Δpt [Pa] LwA [dB(A)] Δpt [Pa] LwA [dB(A)] Δpt [Pa] LwA [dB(A)]
1 < 5 < 20 6 32 130 49
2 < 5 23 23 49 520 69
3 < 5 34 52 58 1185 16
4 < 5 42 94 66 1350 83
5 < 5 48 145 71 > 1500* 87
6 < 5 53 215 75 > 1500* 92

Rotation torque required to open and close the damper

Surface area [m2] Servomotor
WITHOUT spring return [Nm] WITH spring return [Nm]
< 0,20 20 10
< 1,50 30 20
< 2,20 40 40
< 3,00 60 40
< 4,00 - 80

Manual control

Description
Manual control R12 pin ø 18mm a.r.
Request for product information

ERT200T

data
Message