EDR Light regulation dampers

Description

Galvanized steel damper complete with manual control.

Characteristics

Spigot lenght :
- diameters from 80 to 250 mm L2 = 40 mm;
- diameters from 250 to 355 mm L2 = 60 mm;
- diameter from 400 to 500 mm L2 = 80 mm.

Loader supports features:
- diameters from 80 to 280 mm polyoxymethylene support;
- diameters from 400 to 500 mm aluminum support.

On demand

Pin and plate for motorization.

Information and price list
Documents
Recommended Products
Information request

Dimensions and price list

Dimensions are expressed in mm.

Item normally available from stock

modell d1	L	Damper EDR	modell d1	L	Damper EDR
		euro
80	200	29,67	250	220	48,50
100	200	30,98	280	250	59,40
125	200	36,13	300	250	70,49
140	200	38,80	315	250	70,49
150	200	38,77	355	250	78,74
160	200	38,94	400	250	88,21
180	200	40,32	450	250	247,55
200	220	41,02	500	390	261,06

Recommended servomotors

		Servomotor WITHOUT SPRING RETURN
		CM	LM..A
Couple		2 Nm	5 Nm
Universal pin size (mm):		6-12,7	6-20
For damper up to:		0,4 m²	1 m²
ON/OFF 3-Point	AC /DC 24 V	CM24-L	LM24A
	AC /DC 24 V With auxiliary contact		LM24A-S
	AC 230 V	CM230-L	LM230A
	AC 230 V With auxiliary contact		LM230A-S
MODULANT Comand 0...10V	AC /DC 24 V	CM24-SR-L	LM24A-SR
	AC /DC 24 V With auxiliary contact
	AC 230 V		LM230ASR

		Servomotor WITH SPRING RETURN
		TF	LF
Couple		2,5 Nm	4 Nm
Universal pin size (mm):		6-12,7	8-16
For damper up to:		0,5 m²	0,8 m²
ON/OFF 3-Point	AC /DC 24 V	TF24	LF24
	AC /DC 24 V With auxiliary contact	TF24-S	LF24-S
	AC 230 V	TF230	LF230
	AC 230 V With auxiliary contact	TF230-S	LF230-S
MODULANT Comand 0...10V	AC /DC 24 V	TF24-SR	LF24-SR
	AC /DC 24 V With auxiliary contact
	AC 230 V	TF230-SR

Accessories for installation servomotors

To install the servomotor on the EDR damper it is necessary to purchase a specific pin and a specific plate.

Item normally available from stock

Description	Euro
Short pin L = 60mm (suitable for installation on CM LM ... A series servomotors)	14,74
Short plate (suitable for installation on CM LM ... A TF series servomotors)	3,69
Long pin L = 100mm (suitable for installation on TF LF series servomotors)	14,29
Long plate (suitable for installation on LF series servomotors)	3,69